Cisco Catalyst 2960-S switches feature:
24 or 48 Gigabit Ethernet ports
1G Small Form-Factor Pluggable (SFP) or 1G/10G SFP+ slots
Cisco FlexStack stacking with 20 Gbps of stack throughput (optional)
IEEE 802.3at-compliant PoE+ for up to 30W of power per port
Up to 740W of combined PoE/PoE+ budget
USB interfaces for management and file transfers
LAN Base or LAN Lite Cisco IOS® Software feature set
SmartOperations tools that simplify deployment and reduce the cost of network administration
An enhanced limited lifetime hardware warranty (E-LLW), providing next-business-day replacement
| Model | WS-C2960S-24PD-L |
Dimensions & Weight | |
General | Switch - 24 ports - managed - stackable |
| Width | 4.5 |
| Depth | 44.5 |
| Height | 38.6 |
| Weight | 5.7kg |
Environmental Parameters | |
| Min Operating Temperature | 23 °F |
| Max Operating Temperature | 113.F |
| Humidity Range Operating | 5-95% |
| Min Storage Temperature | -13 °F |
| Max Storage Temperature | 158 °F |
| Humidity Range Storage | 5 - 95% (non-condensing) |
Flash Memory | |
| Installed Size | 64 MB |
Header | |
| Compatibility | pc |
| Manufacturer | cisco |
| Packaged Quantity | 1 |
| Product Line | Cisco Catalyst |
| Model | WS-C2960S-24PD-L |
Interface Provided | |
| Qty | 24 |
| Comments | PoE+ |
| Type | 1000Base-T |
| Connector Type | SFP |
Miscellaneous | |
| Compliant Standards | AS/NZ 3548 Class A, CB, CSA C22.2 No. 60950-00, cUL, EN 60950, EN55022, EN55024, FCC Class A certified, FCC Part 15, IEC 60950, MIC, NOM, TUV GS, UL, UL 60950 Third Edition, VCCI Class A ITE |
| Authentication Method | Kerberos, RADIUS, Secure Shell v.2 (SSH2), TACACS+ |
| Remote Management Proto | CLI, RMON 1, RMON 2, RMON 3, RMON 9, SNMP 1, SNMP 2, SNMP 2c, SNMP 3, SSH, Telnet, TFTP |
| MTBF | 245,604 |
| Height (Rack Units) | 1 |
Performance | |
| Type | Forwarding performance (64-byte packet size) |
Value | 23.8 Mpps |
| Ports | |
| Qty | 24 |
| Type | 10/100/1000(POE+) |
Ports (2nd) | |
| Qty | 4 |
| Type | Combo Gigabit SFP |
Power Device | |
| Frequency Required | 50/60 Hz |
| Power Consumption Opera | 300 Watt |
| Nominal Voltage | AC 120/230 V |
| Type | Internal power supply |
RAM | |
| Installed Size | 512 MB |
Service &Support | |
| Type | Limited lifetime warranty |
Software | |
| Type | Switch |
| Remote Management Proto | HTTP, RMON 1, RMON 2, SNMP 1, SNMP 2c, SNMP 3, Telnet |
| Compliant Standards | IEEE 802.1D, IEEE 802.1p, IEEE 802.1Q, IEEE 802.1s, IEEE 802.1w, IEEE 802.1x, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ad (LACP), IEEE 802.3af, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z |
| Features | Access Control List (ACL) support, Auto-negotiation, Auto-sensing per device, Auto-uplink (auto MDI/MDI-X), DHCP server, DHCP snooping, DHCP support, Dynamic ARP Inspection (DAI), Dynamic Trunking Protocol (DTP) support, Full duplex capability, IGMP snooping, IP-routing, Layer 2 switching, Layer 3 switching, Manageable, MLD snooping, MPLS support, Port Aggregation Protocol (PAgP) support, Power over Ethernet (PoE), Quality of Service (QoS), Time Domain Reflectometry (TDR), Traffic shaping, Trivial File Transfer Protocol (TFTP) support, Trunking, Virtual Route Forwarding-Lite (VRF-Lite), VLAN support |
| Subcategory | Network hubs and switches |
| Power Over Ethernet (PoE) | Not PoE+ |
| Advanced Switching | Layer 3 |
| Routing Protocol | RIP-1, RIP-2, Static IP routing |
| PoE Budget | 240 W |