Are you deploying or maintaining high-speed enterprise networks, data centers, or cloud infrastructure? The Fluke Networks OneTouch AT 10G Network Assistant is the industry's premier handheld platform designed to give you instant insight and answers. Move beyond basic cable testers and complex software—this all-in-one tool integrates the power of multiple instruments to dramatically reduce troubleshooting time from hours to minutes.
The OneTouch AT 10G is engineered for network engineers, IT technicians, and installers who demand uncompromising performance. It delivers unmatched capabilities for testing and certifying the performance of both copper and fiber optic cabling, while simultaneously analyzing the network and Wi-Fi environment. Ensure your critical infrastructure meets the highest standards of performance and reliability.
Key Features & Unmatched Advantages:
Comprehensive Media Testing: Perform automatic fiber and copper certification tests with a single unit. Verify link speed, cable length, PoE availability, and wire-map faults. Optional fiber modules allow for precise loss, length, and polarity testing on both single-mode and multimode fibers up to 10G.
Advanced Network Analysis: Go beyond physical layer testing. The onboard 10G Ethernet port enables deep network discovery, identifying active devices, VLAN configurations, and Top Talkers. Run one-click Internet and speed tests to validate bandwidth and SLA compliance instantly.
Integrated Wi-Fi Analysis: Don't ignore the wireless network. The built-in Wi-Fi radio discovers all nearby access points, checks SSID availability, measures signal strength, and validates security settings (WEP, WPA, WPA2, WPA3), providing a complete wired and wireless assessment.
Intelligent Auto-Test & Reporting: The revolutionary AutoTest function runs a complete battery of physical and network tests with a single button press. Generate professional, branded PDF reports on the spot to prove network health and performance to your clients, eliminating disputes.
Cloud-Connected for Collaboration: Seamlessly connect to Fluke's Link-Live cloud platform. Securely upload test results, share findings with team members for remote assistance, and manage all your projects from anywhere in the world.
Technical Specifications:
Network Interface: 10/100/1000/2500/5000/10000 Mbps RJ45 (Copper), SFP/SFP+ slots (Fiber)
Supported Media: Cat 5e to Cat 8/Class I/II Copper, Multimode & Single-mode Fiber (with modules)
Wi-Fi Support: 802.11 a/b/g/n/ac/ax (Wi-Fi 6), 2.4 GHz & 5 GHz
Display: 7-inch capacitive touchscreen with intuitive graphical interface
Cloud Service: Integrated Fluke Link-Live
Ideal For:
Enterprise Network Engineers & Data Center Technicians
Network Installers and Integrators
Telecom and Internet Service Providers (ISPs)
IT Consultants and Managed Service Providers (MSPs)
Anyone deploying or supporting high-performance 10G infrastructure
| Category | Specification | Details |
|---|---|---|
| General | Model | Fluke Networks OneTouch™ AT 10G Network Assistant |
| Type | Advanced Handheld Network Tester & Certifier | |
| Primary Use | Network deployment, troubleshooting, and certification for copper, fiber, and Wi-Fi | |
| Display | 7-inch (178 mm) capacitive touchscreen LCD (1280 x 800) with GUI | |
| Hardware & Interfaces | Copper Interface | 10/100/1000/2500/5000/10000 Mbps RJ45 (with Auto-MDIX) |
| Fiber Interface | 2 x SFP+/SFP slots (supports 1G/10G modules) | |
| USB Ports | 1 x USB-C (data/charging), 1 x USB-A (for peripherals like Wi-Fi adapter) | |
| PoE Testing | Yes (Tests for PoE, PoE+, UPOE/PoE++ and measures voltage/wattage) | |
| Design | Ruggedized, handheld design with removable shoulder strap | |
| Battery | Rechargeable lithium-ion battery, hot-swappable | |
| Battery Life | Up to 6 hours (typical use) | |
| Testing Capabilities - Copper | Copper Certification | Yes (with optional OneTouch Copper Certification Module) |
| Supported Standards | Certifies up to Cat 8/Class I/II (TIA), Class F/FA (ISO) | |
| Basic Copper Tests | Wire Map, Length, Prop Delay, Resistance, Loop Resistance | |
| Cable Identification | Yes (with optional Tone and Probe accessory) | |
| Testing Capabilities - Fiber | Fiber Certification | Yes (with optional Fiber OTDR and Light Source/Power Meter Modules) |
| Fiber Testing | Bi-directional loss, length, polarity (via Fiber OLTS module); OTDR tracing (via OTDR module) | |
| Fiber Connectors | Supports LC, SC, and other connectors via adapter | |
| Testing Capabilities - Network | Network Discovery | Auto-discovers switches, routers, servers, and other devices. Identifies VLANs. |
| Active Testing | One-click Internet test, DHCP test, Ping, Traceroute, Port discovery | |
| Speed Test | Measures uplink and downlink throughput to cloud-based servers | |
| Top Talkers | Identifies devices consuming the most bandwidth | |
| Testing Capabilities - Wireless | Wi-Fi Adapter | Optional (AirCheck Wi-Fi 6 Adapter) |
| Wi-Fi Standards | 802.11a/b/g/n/ac/ax (Wi-Fi 6) | |
| Frequency Bands | 2.4 GHz & 5 GHz (6 GHz with compatible adapter) | |
| Wi-Fi Analysis | AP discovery (SSID, BSSID, channel, security), signal strength, channel utilization | |
| Software & Data Management | AutoTest | One-button test for physical, network, and Wi-Fi (if adapter present) |
| Reporting | Generates professional, customizable PDF reports on the device | |
| Cloud Service | Fluke Link-Live™ Cloud (Included) | |
| Cloud Features | Auto-upload tests, remote viewing, team collaboration, asset tracking | |
| On-board Storage | 16 GB internal storage for test results and reports | |
| Physical | Dimensions (H x W x D) | 307 x 193 x 81 mm (12.1 x 7.6 x 3.2 in) |
| Weight | 3.2 kg (7.0 lbs) with internal battery and copper module | |
| Operating Temperature | 0° to 40°C (32° to 104°F) | |
| What's Included | Standard Package | OneTouch AT 10G Main Unit, Internal Battery, AC Power Adapter, USB-C Cable, Quick Start Guide |
| Required for Use | Optional modules are required for certification: Copper Certification Module, Fiber OLTS Module, or OTDR Module. Wi-Fi adapter is also optional. |
All-in-One Solution: Replaces multiple tools (cable certifier, OTDR, light source, power meter, network analyzer) in a single, portable unit.
10G Ready: Validates network performance for high-speed 10 Gigabit applications on both copper and fiber.
Professional Certification: Generates standards-compliant certification reports for both copper (Cat 8) and fiber, essential for installers and technicians.
Cloud-Connected Efficiency: Link-Live cloud platform enables seamless collaboration, remote support, and centralized project management.
Unmatched Versatility: The platform is future-proofed through optional, field-installable modules, allowing you to customize the tool for your specific job requirements.