Views: 41 Author: Site Editor Publish Time: 2021-06-09 Origin: Site
Introduction
This document describes the License Support for Business Edition 6000 (BE6000) starter Licenses on Cisco Unified Communications Manager (CUCM) version 12.5.
Prerequisites
Requirements
Cisco recommends that you have knowledge of these topics:
● CUCM version 12.5
● BE6000
Components Used
The information in this document is based on Cisco Call Manager version 12.5
The information in this document was created from the devices in a specific lab environment. All of the devices used in this document started with a cleared (default) configuration. If your network is live, ensure that you understand the potential impact of any command
Background Information
Along with the Bootable ISO, OVA’s, BE6000 also comes with some starter license bundle. These Starter License bundle can be of two types:
1. UCL – Licenses adjusted among Enhanced, Basic & Essential
2. UWL- Licenses adjusted among CUWL, Enhanced Plus, Enhanced, Basic & Essential
UCM when setup in BE6000 mode to request and consume BE6000 specific license so to avoid cross usage in other solution offers. The administrator can enable/disable BE6000 mode through
Along with the Bootable ISO, OVA’s, BE6000 also comes with some starter license bundle. These Starter License bundle can be of two types:
1. UCL – Licenses adjusted among Enhanced, Basic & Essential
2. UWL- Licenses adjusted among CUWL, Enhanced Plus, Enhanced, Basic & Essential
UCM when setup in BE6000 mode to request and consume BE6000 specific
While the mode is selected confirm which Starter Pack licenses are required (None/UCL/UWL). Starter Pack licenses will be BE6000 UCL Starter Bundle or BE6000 UWL Starter Bundle or None.
Procedure
This is the procedure to enable BE6000 licensing mode
1 Administrator enables BE6000 mode from CLI. utils BE6000Mode disableutils BE6000Mode enableutils BE6000Mode status.
2 .While BE6000 mode is enabled, the administrator selects UCL or UWL starter bundle or NONE.
3.Licenses are adjusted based on the starter bundle chosen (UCL/UWL). No adjustments are done when NONE is chosen. UCL – Licenses adjusted among Enhanced, Basic & EssentialUWL- Licenses adjusted among CUWL, Enhanced Plus, Enhanced, Basic and Essential.
4.License Management UI displays the license consumption and deployment mode.
5.Only 35 licenses are adjusted to UCL & UWL starter pack.
Note: Product instance must be deregistered from Cisco Smart Software Manager or satellite before this utils BE6000Mode enable command is executed.
BE6000 Mode is enabled only when the product instance is in Enterprise Mode
License Management UI
After BE6000 mode is enabled, you can observe these changes on License Management UI:
● Displays the licensing mode as BE6000.
● License Requirements By Type shows BE6000 licenses and starter bundles. BE6000 UCL Starter Bundle.BE6000 UWL Starter Bundle.
● When you add more devices or associated with the user, the license is fulfilled first from the start pack bundle.
● Once the starter pack bundle is exhausted which means we have used all 35 licenses then the next license fulfilment would be from normal via CSSM.
● The Current Usage column shows as 0 until it has exhausted all the 35 starter pack licenses.
Note: License Consumption will be adjusted among CUWL, Enhanced Plus, Enhanced, Basic & Essential based on starter bundle chosen. ‘*’ symbol is displayed against licenses that are adjusted from a BE6000 starter bundle.