 |
| Description of 901-R510-WW00 | |
| Ruckus’ BeamFlex+ adaptive antennas allow the R510 AP to dynamically choose among a host of antenna patterns (up to 64 possible combinations) in real-time to establish the best possible connection with every device. | |
| Traditional omni-directional antennas, found in generic access points, oversaturate the environment by needlessly radiating RF signals in all directions. In contrast, the Ruckus BeamFlex+ adaptive antenna directs the radio signals per-device on a packet-by-packet basis to optimize Wi-Fi coverage and capacity in real-time to support high device density environments. BeamFlex+ operates without the need for device feedback and hence can benefit even devices using legacy standards. | |
| Data sheet of 901-R510-WW00 | |
| Wi-Fi Standards | IEEE 802.11a/b/g/n/ac Wave 2 |
| Supported Rates | 802.11ac: 6.5 to 867Mbps (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80) |
| 802.11n: 6.5 Mbps to 300Mbps (MCS0 to MCS15) | |
| 802.11a/g: 54, 48, 36, 24, 18, 12, 9 , 6Mbps | |
| 802.11b: 11, 5.5, 2 and 1 Mbps | |
| Supported Channels | 2.4GHz: 1-13 |
| 5GHz: 36-64, 100-144, 149-165 | |
| MIMO | 2x2 SU-MIMO |
| 2x2 MU-MIMO | |
| Mesh | SmartMesh™ wireless meshing technology. Self-healing Mesh |
| IP | IPv4, IPv6 |
| VLAN | 802.1Q (1 per BSSID or dynamic per use based on RADIUS) |
| VLAN Pooling | |
| Port-based | |
| 802.1x | Authenticator & Supplicant |
| Tunnel | L2TP, GRE, Soft-GRE |
| Policy Management Tools | Application Recognition and Control |
| Access Control Lists | |
| Device Fingerprinting | |
| Rate Limiting | |
| Description of 901-R510-WW00 | |
| Ruckus’ BeamFlex+ adaptive antennas allow the R510 AP to dynamically choose among a host of antenna patterns (up to 64 possible combinations) in real-time to establish the best possible connection with every device. | |
| Traditional omni-directional antennas, found in generic access points, oversaturate the environment by needlessly radiating RF signals in all directions. In contrast, the Ruckus BeamFlex+ adaptive antenna directs the radio signals per-device on a packet-by-packet basis to optimize Wi-Fi coverage and capacity in real-time to support high device density environments. BeamFlex+ operates without the need for device feedback and hence can benefit even devices using legacy standards. | |
| Data sheet of 901-R510-WW00 | |
| Wi-Fi Standards | IEEE 802.11a/b/g/n/ac Wave 2 |
| Supported Rates | 802.11ac: 6.5 to 867Mbps (MCS0 to MCS9, NSS = 1 to 2 for VHT20/40/80) |
| 802.11n: 6.5 Mbps to 300Mbps (MCS0 to MCS15) | |
| 802.11a/g: 54, 48, 36, 24, 18, 12, 9 , 6Mbps | |
| 802.11b: 11, 5.5, 2 and 1 Mbps | |
| Supported Channels | 2.4GHz: 1-13 |
| 5GHz: 36-64, 100-144, 149-165 | |
| MIMO | 2x2 SU-MIMO |
| 2x2 MU-MIMO | |
| Mesh | SmartMesh™ wireless meshing technology. Self-healing Mesh |
| IP | IPv4, IPv6 |
| VLAN | 802.1Q (1 per BSSID or dynamic per use based on RADIUS) |
| VLAN Pooling | |
| Port-based | |
| 802.1x | Authenticator & Supplicant |
| Tunnel | L2TP, GRE, Soft-GRE |
| Policy Management Tools | Application Recognition and Control |
| Access Control Lists | |
| Device Fingerprinting | |
| Rate Limiting | |
