 |
| AIR-AP3802I-H-K9 Specification | |
| Software and supported wireless LAN controllers | Cisco Unified Wireless Network Software Release 8.2.MR1 or later |
| Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller | |
| Cisco IOS®XE Software Release 16.3 – Target Q3 CY2016 | |
| Cisco Catalyst 3850 Series and 3650 Series Switches | |
| 802.11n version 2.0 (and related) capabilities | 4x4 MIMO with three spatial streams |
| Maximal ratio combining (MRC) | |
| 802.11n and 802.11a/g beamforming | |
| 20- and 40-MHz channels | |
| PHY data rates up to 450 Mbps (40 MHz with 5 GHz). | |
| Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
| 802.11 dynamic frequency selection (DFS) | |
| Cyclic shift diversity (CSD) support | |
| 802.11ac Wave 1 capabilities | 4x4 MIMO with three spatial streams |
| MRC | |
| 802.11ac beamforming | |
| 20-, 40-, and 80-MHz channels | |
| PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) | |
| Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
| 802.11 DFS | |
| CSD support | |
| 802.11ac Wave 2 capabilities | 4x4 MU-MIMO with three spatial streams |
| MRC | |
| 802.11ac beamforming | |
| 20-, 40-, 80, 160-MHz channels | |
| PHY data rates up to 5.2 Gbps | |
| Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
| 802.11 DFS | |
| CSD support | |
| Integrated antenna | Flexible radio (either 2.4 GHz or 5 GHz) |
| 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth | |
| 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90° | |
| Dedicated 5-GHz radio | |
| 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth | |
| External antenna (sold separately) | 3802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) |
| 3802p Series access points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N=antenna | |
| Cisco offers the industry's broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios | |
| Smart Antenna Connector | Available on the 3802e Series and 3802p Series access points only |
| Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point | |
| Required when running the flexible radio as either a: | |
| ◦ Second 5-GHz serving radio | |
| ◦ Wireless Security Monitoring radio | |
| Interfaces | ◦ 2 Ethernet ports |
| ◦ 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz | |
| ◦ CAT 5e cabling | |
| ◦ Higher-quality 10GBASE-T (CAT 6/6a) cabling | |
| ◦ 100/1000BASE-T autosensing (RJ-45 - AUX port) | |
| ◦ Management console port (RJ-45) | |
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
| Dimensions (W x L x H) | Access point (without mounting brackets): 3802I: 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm), 3802E: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm), 3802P: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm) |
| Weight | 4.6 lb (2.09 kg) |
| Input power requirements | 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE®) |
| 802.3at power injector (AIR-PWRINJ6=) | |
| 50W power supply (AIR-PWR-50=) | |
| Power draw | 30W at the PSE with all features enabled except for the USB 2.0 port |
| 34W at the PSE with the USB 2.0 port enabled | |
| Environmental | Cisco Aironet 3800i |
| Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
| Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
| Operating temperature: 32° to 104°F (0° to 40°C) | |
| Operating humidity: 10% to 90% percent (noncondensing) | |
| Operating altitude test: 40˚C, 9843 ft. | |
| Cisco Aironet 3800e | |
| Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
| Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
| Operating temperature: -4° to 122°F (-20° to 50°C) | |
| Operating humidity: 10% to 90% (noncondensing) | |
| Operating altitude test: 40˚C, 9843 ft. | |
| Cisco Aironet 3800p | |
| Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
| Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
| Operating temperature: -4° to 122°F (-20° to 50°C) | |
| Operating humidity: 10% to 90% (noncondensing) | |
| Operating altitude test: 40˚C, 9843 ft. | |
| System memory | 1024 MB DRAM |
| 256 MB flash | |
| Warranty | Limited lifetime hardware warranty |
| AIR-AP3802I-H-K9 Specification | |
| Software and supported wireless LAN controllers | Cisco Unified Wireless Network Software Release 8.2.MR1 or later |
| Cisco 2500 Series Wireless Controllers, Cisco Wireless Controller Module for ISR G2, Cisco Wireless Services Module 2 (WiSM2) for Catalyst®6500 Series Switches, Cisco 5500 Series Wireless Controllers, Cisco Flex® 7500 Series Wireless Controllers, Cisco 8500 Series Wireless Controllers, Cisco Virtual Wireless Controller | |
| Cisco IOS®XE Software Release 16.3 – Target Q3 CY2016 | |
| Cisco Catalyst 3850 Series and 3650 Series Switches | |
| 802.11n version 2.0 (and related) capabilities | 4x4 MIMO with three spatial streams |
| Maximal ratio combining (MRC) | |
| 802.11n and 802.11a/g beamforming | |
| 20- and 40-MHz channels | |
| PHY data rates up to 450 Mbps (40 MHz with 5 GHz). | |
| Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
| 802.11 dynamic frequency selection (DFS) | |
| Cyclic shift diversity (CSD) support | |
| 802.11ac Wave 1 capabilities | 4x4 MIMO with three spatial streams |
| MRC | |
| 802.11ac beamforming | |
| 20-, 40-, and 80-MHz channels | |
| PHY data rates up to 1.3 Gbps (80 MHz in 5 GHz) | |
| Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
| 802.11 DFS | |
| CSD support | |
| 802.11ac Wave 2 capabilities | 4x4 MU-MIMO with three spatial streams |
| MRC | |
| 802.11ac beamforming | |
| 20-, 40-, 80, 160-MHz channels | |
| PHY data rates up to 5.2 Gbps | |
| Packet aggregation: A-MPDU (Tx/Rx), A-MSDU (Tx/Rx) | |
| 802.11 DFS | |
| CSD support | |
| Integrated antenna | Flexible radio (either 2.4 GHz or 5 GHz) |
| 2.4 GHz, gain 4 dBi, internal antenna, omnidirectional in azimuth | |
| 5 GHz, gain 6 dBi, internal directional antenna, elevation plane beamwidth 90° | |
| Dedicated 5-GHz radio | |
| 5 GHz, gain 5 dBi, internal antenna, omnidirectional in azimuth | |
| External antenna (sold separately) | 3802e Series access points are certified for use with antenna gains up to 6 dBi (2.4 GHz and 5 GHz) |
| 3802p Series access points are certified for use with antenna gains up to 13 dBi (2.4 GHz and 5 GHz) with the AIR-ANT2513-P4M-N=antenna | |
| Cisco offers the industry's broadest selection ofantennas, delivering optimal coverage for a variety of deployment scenarios | |
| Smart Antenna Connector | Available on the 3802e Series and 3802p Series access points only |
| Requires the AIR-CAB002-DART-R= 2 ft smart antenna connector to RP-TNC connectors to connect a second antenna to the access point | |
| Required when running the flexible radio as either a: | |
| ◦ Second 5-GHz serving radio | |
| ◦ Wireless Security Monitoring radio | |
| Interfaces | ◦ 2 Ethernet ports |
| ◦ 100/1000/2500/5000 Multigigabit Ethernet (RJ-45) – IEEE 802.3bz | |
| ◦ CAT 5e cabling | |
| ◦ Higher-quality 10GBASE-T (CAT 6/6a) cabling | |
| ◦ 100/1000BASE-T autosensing (RJ-45 - AUX port) | |
| ◦ Management console port (RJ-45) | |
| Indicators | Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader errors |
| Dimensions (W x L x H) | Access point (without mounting brackets): 3802I: 8.66 x 8.68 x 2.46 in. (22 x 22 x 6.25 cm), 3802E: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm), 3802P: 8.66 x 8.68 x 2.62 in. (22 x 22 x 6.7 cm) |
| Weight | 4.6 lb (2.09 kg) |
| Input power requirements | 802.3at PoE+, Cisco Universal Power over Ethernet (Cisco UPOE®) |
| 802.3at power injector (AIR-PWRINJ6=) | |
| 50W power supply (AIR-PWR-50=) | |
| Power draw | 30W at the PSE with all features enabled except for the USB 2.0 port |
| 34W at the PSE with the USB 2.0 port enabled | |
| Environmental | Cisco Aironet 3800i |
| Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
| Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
| Operating temperature: 32° to 104°F (0° to 40°C) | |
| Operating humidity: 10% to 90% percent (noncondensing) | |
| Operating altitude test: 40˚C, 9843 ft. | |
| Cisco Aironet 3800e | |
| Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
| Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
| Operating temperature: -4° to 122°F (-20° to 50°C) | |
| Operating humidity: 10% to 90% (noncondensing) | |
| Operating altitude test: 40˚C, 9843 ft. | |
| Cisco Aironet 3800p | |
| Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C) | |
| Nonoperating (storage) altitude test: 25˚C, 15,000 ft. | |
| Operating temperature: -4° to 122°F (-20° to 50°C) | |
| Operating humidity: 10% to 90% (noncondensing) | |
| Operating altitude test: 40˚C, 9843 ft. | |
| System memory | 1024 MB DRAM |
| 256 MB flash | |
| Warranty | Limited lifetime hardware warranty |
