Wi-Fi is a critical amenity as users bring more devices into hotel rooms, meeting rooms, and classrooms. However, providing great Wi-Fi performance in every room is cost-prohibitive.
The RUCKUS H510 combines an 802.11ac Wave 2 Wi-Fi access point and wired switch into one wall-mount device. Designed specifically for per-room deployments, the H510 is compact, inconspicuous, secure, and easy to mount to an electrical junction box. Bottom facing Ethernet ports eliminate unsightly cabling and accommodates any furniture placement.
Easily supports converged wired and wireless services with one device, that include VoIP, IPTV, high-speed Internet access and in-room Wi-Fi device connectivity.
This 802.11ac Wave 2 Wi-Fi AP and switch incorporates patented technologies found only in the Ruckus Wi-Fi portfolio.
Extended coverage with patented BeamFlex+ utilizing multi-directional antenna patterns
Improved throughput with ChannelFly which dynamically find less congested Wi-Fi channels to use
The H510 supports Multi-User MIMO (MU-MIMO) which increases network throughput by transmitting to multiple clients simultaneously.
Support per-room wired IP devices from TVs to phones with 2 onboard Ethernet ports. Also, with built-in visual troubleshooting tools within Ruckus Wi-Fi controllers, administrators can accelerate resolution of trouble tickets.
Whether organizations are deploying ten or ten thousand APs, the H510 can be deployed as a standalone AP or centrally managed by SmartZone or ZoneDirector management platforms.
Ruckus' BeamFlex+ adaptive antennas allow the h510 AP to dynamically choose among a host of antenna patterns in real-time to establish the best possible connection with every device. This leads to:
Better Wi-Fi coverage
Reduced RF interference
Traditional omni-directional antennas, found in generic access points, oversaturate the environment by needlessly radiating RF signals in all directions. In contrast, the Ruckus BeamFlex+ adaptive antenna directs the radio signals per- device on a packet by-packet basis to optimize Wi-Fi coverage and capacity in real- time to support high device density environments. BeamFlex+ operates without the need for device feedback and hence can benefit even devices using legacy standards.
|Antenna Gain||Up to 1 dBi|
|Antenna Patterns, per band||4|
|Controller Support||Cloud Wi-Fi | SmartZone | Standalone | Unleashed | ZoneDirector|
|Ethernet Ports||5 x 1GbE|
|PHY Rate at 2.4 GHz, maximum||300 Mb/s|
|PHY Rate at 5 GHz, maximum||867 Mb/s|
|Rx Sensitivity at 2.4 GHz||-99 dBm|
|Rx Sensitivity at 5 GHz||-96 dBm|
|Venue Type||Education | Hospitality|
|Venue Sub-Type||Guest Rooms | Residence Hall|
|Wi-Fi Interface Standard||IEEE 802.11a/b/g/n/ac Wave 2|
|Wi-Fi Interface Standard at 2.4 GHz||802.11n|
|Wi-Fi Interface Standard at 5 GHz||802.11ac|
|Wi-Fi Standards|| |
|Supported Rates|| |
|Spatial Streams|| |
|Radio Chains and Streams|| |
|Other Wi-Fi Features|| |
|Controller Platform Support|| |
|Policy Management Tools|| |
|IoT Capable|| |
|Physical Size|| |
|Operating Temperature|| |
|Operating Humidity|| |