| WS-C2960X-24PS-L Specification |
| General |
| model info: | WS-C2960X-24PS-L |
| enclosure type | Rack-mountable - 1U |
| Ports | 24 x 10/100/1000 + 4 x 1G SFP |
| Network management Interface | 10/100 Mbps Ethernet (RJ-45) |
| Available PoE Power | 370W |
| Forwarding bandwidth(Gbps) | 108Gbps |
| Maximum stacking number | 8 |
| Stack Bandwidth | 80G |
| Forwarding Performance | 71.4Mpps |
| Switching bandwidth | 216Gbps |
| Maximum active VLANs | 1023 |
| MAC Address Table Size | 16K (default) |
| CPU | APM86392 600MHz dual core |
| RAM | 512 MB |
| Flash Memory | 128 MB |
| Status Indicators | Per-port status: Link integrity, disabled, activity, speed, and full duplex System status: System, RPS, Stack link status, link duplex, PoE, and link speed |
| Expansion / Connectivity |
| Console ports | USB (Type-B), Ethernet (RJ-45) |
| Stacking cable | Optional |
| Power Redundancy | Option (PWR-RPS2300) |
| Voltage range (Auto) | 110V-240V |
| Power Consumption Operational | 0.49KVA |
| Miscellaneous |
| Width | 17.5 Inches (44.5 cm) |
| Depth | 14.5 Inches (36.8 cm) |
| Height | 1.75 Inches (4.5 cm) |
| Package Weight | 23.48 Pounds (10.65Kg) |
| Weight | 12.8 Pounds (5.8 Kg) |
| Rack Mounting Kit | optional |
| MTBF in hours | 324,280 |
| Compliant Standards | ● IEEE 802.1D Spanning Tree Protocol |
| ● IEEE 802.1p CoS Prioritization |
| ● IEEE 802.1Q VLAN |
| ● IEEE 802.1s |
| ● IEEE 802.1w |
| ● IEEE 802.1X |
| ● IEEE 802.1ab (LLDP) |
| ● IEEE 802.3ad |
| ● IEEE 802.3af and IEEE 802.3at |
| ● IEEE 802.3ah (100BASE-X single/multimode fiber only) |
| ● IEEE 802.3x full duplex on 10BASE-T, 100BASE-TX, and 1000BASE-T ports |
| ● IEEE 802.3 10BASE-T |
| ● IEEE 802.3u 100BASE-TX |
| ● IEEE 802.3ab 1000BASE-T |
| ● IEEE 802.3z 1000BASE-X |
| ● RMON I and II standards |
| ● SNMP v1, v2c, and v3 |
| ● IEEE 802.3az |
| ● IEEE 802.3ae 10Gigabit Ethernet |
| System software / license |
| System software | IOS LAN BASE |
| license | NERGY-MGT-100-K9, EW-DO-100-DE |
| features | ●RPS Support |
| ● Jumbo Frames |
| ● VLANS |
| ●Voice Vlan |
| ●VTPv2 |
| ●CDPv2 |
| ●LLDP |
| ● 802.3ad LACP |
| ● PVST/PVST+ |
| ● 802.1W/802.1S |
| ● Port Fast/Uplink Fast |
| ● port CoS Trust and Override |
| ● Scheduling |
| ● Priority Queuing |
| ● Configure CoS Priority Queues |
| ● Weighted Tail Drop |
| ● DSCP transparency |
| Network security | ● SSH, SSL and SCP |
| ● RADIUS and TACACS+ |
| ● SNMPv3 crypto |
| ● 802.1x |
| ● 802.1x Accounting / MIB |
| ● 802.1x w/ port security |
| ● 802.1x w/Voice VLAN |
| ● 802.1x Guest VLAN |
| ● 802.1x VLAN assignment |
| ● 802.1x MAC-Auth Bypass |
| ● BPDU/Root Guard |
| ● Port Security |
| ● Private VALN Edge |
| ● Storm Control |
| ● Block unknown unicast and multicast |
| ● IGMP Snooping |
| ● IGMP Filter/Throttle |
| Management and Troubleshooting | ● Auto-MDOX |
| ●TDR |
| ● UDLD |
| ● IP SLA Responder |
| ● layer 2 / IP Traceroute |
| ● SPAN |
| ● RSPAN |
| ● Express Setup |
| ● Device Manager |
| ● Cisco Network Assistant |
| ● Smartports + Advisor |
| ● Troubleshooting Advisor |
| ● Drag-and-drop Cisco IOS Upgrade |
| ● IP Address DHCP |
| ● Autoinstall with saved configuration |
| ● Configuration Replace |
| ● DHCP Auto Image Upgrade |
| ● DHCP Port Based Allocation |
| ● Error Disable MIB |
| Environmental Ranges |
| Operating temperature up to 5000 ft (1500 m) | 23ºF to 113ºF |
| Operating temperature up to 10,000 ft (3000 m) | 23ºF to 104ºF |
| Short-term exception at sea level* | 23ºF to 131ºF |
| Short-term exception up to 5000 feet (1500 m)* | 23ºF to 122ºF |
| Short-term exception up to 10,000 feet (3000 m)* | 23ºF to 113ºF |
| Short-term exception up to 13,000 feet (4000 m)* | 23º to 104ºF |
| Storage temperature up to 15,000 feet (4573 m) | -13º to 158ºF |
| Operating altitude | Up to 10,000 feet |
| Storage altitude | Up to 13,000 feet |
| Operating relative humidity | 10% to 95% noncondensing |
| Storage relative humidity | 10% to 95% noncondensing |
