| Technical specifications |
| Management |
| Configuration management interfaces | Intuitive CLI with a familiar interface, reducing training costs • Easy-to-use, point-and-click webbased element manager(WebView) with built-in help for easy configuration
• Integration with Alcatel-Lucent OmniVista 2500 for network management*
•Full configuration and reporting using SNMPv1/2/3 across all OmniSwitch families to facilitate third-party NMS integration
•Remote Telnet management or Secure Shell access using SSHv2
• File upload using USB, TFTP, FTP, SFTP, or SCP for faster configuration
• Human-readable ASCII-based configuration files for offline editing and bulk configuration |
| Monitoring and troubleshooting | • Local (on the Flash) and remote server logging: Syslog and command log • Port-based mirroring for troubleshooting and lawful
interception supports four sessions with multiple sources-to-one destination
• Policy-based mirroring that allows selecting the
type of traffic to mirror using QoS policies
• Remote port mirroring that facilitates passing mirrored traffic through the network to a remotely connected device
• Port monitoring feature that allows capturing Ethernet packets to a file, or to an on-screen display to assist in troubleshooting
• sFlow v5 and Remote Network Monitoring (RMON) for advanced monitoring and reporting capabilities for statistics, history, alarms and events
• IP tools: Ping and trace route • Digital Diagnostic Monitoring (DDM):Real-time diagnostics of fiber connections for early detection of optical signal deterioration
• Time Domain Reflectometry (TDR) for locating breaks or other discontinuity in copper cables |
| Network configuration | • Remote auto-configuration download • Auto-negotiating: 10/100/1000 ports automatically configure port speed and duplex setting
•Automatic medium dependent interface/medium-dependent interface crossover (Auto-MDI/MDI-X) configuring to transmit and receive
signals to support straightthrough and crossover cabling
• Bootstrap protocol (BOOTP)/DHCP client that allows auto-configuring switch IP information for simplified deployment
• DHCP relay for forwarding client requests to a DHCP server
• Alcatel-Lucent Mapping Adjacency Protocol (AMAP) for building topology maps
•IEEE 802.1AB Link Layer Discovery Protocol (LLDP) with Media Endpoint Device (MED) extensions for automated device discovery
•Multiple VLAN Registration Protocol (MVRP) for IEEE 802.1Q-compliant VLAN pruning and dynamic VLAN creation
• Auto-QoS for switch management traffic and traffic from Alcatel-Lucent IP phones
• Network Time Protocol (NTP) for networkwide time synchronization •Stackable to four units |
| Containment, monitoring and quarantine | • DHCP snooping, DHCP IP spoof protection • TACACS+ client allowing authentication, authorization and accounting with a remote TACACS+ server • Dynamic Address Resolution Protocol (ARP) protection and ARP poisoning detection • ACLs for filtering out unwanted traffic including DoS attacks; flowbased filtering in hardware (L1 to L4) • Bridge Protocol Data Unit (BPDU) blocking:Automatically shutting down user ports if an STP BPDU packet is seen to prevent topology loops • STP Root Guard: Preventing edge
devices from becoming Spanning Tree Protocol root nodes |
| Converged networks | PoE • PoE models support Alcatel-Lucent IP phones and WLAN access points, as well as any IEEE 802.3af or IEEE 802.3at-compliant end devices • Configurable per-port PoE priority and max power for power allocation • Dynamic PoE allocation: Delivering only the amount of power needed by the powered devices (PD) up to the total power budget for most efficient power consumption QoS •Priority queues: Eight hardwarebased queues per port for flexible QoS management • Traffic prioritization: Flow-based QoS with internal and external (remarking) prioritization • Bandwidth management: Flow-based
bandwidth management, ingress rate limiting; egress rate shaping per port
• Queue management: Configurable scheduling algorithms,
including Strict Priority Queuing (SPQ), Weighted Round Robin (WRR) and Deficit Round Robin (DRR)
• Congestion avoidance: Support for Endto- End Head-Of-Line (E2E-HOL) blocking protection
• Auto QoS for switch management traffic and traffic from Alcatel-Lucent IP phones
• Three-color marker: Single/dual rate policing with commit bandwidth (BW), excess BW and burst size |
| Layer-2, Layer-3 Routing and Multicast | •Layer-2 switching
• Up to 16,000 MACs
• Up to 4000 VLANs
• Up to 1,000 ingress rules
• Up to 128 egress rules
• Latency: < 4 μs
•Max Frame: 9,216 bytes (jumbo) IPv4 and IPv6
• Static routing ( IPv4 and IPv6)
• Up to 8 IPv4 and 4 IPv6 interfaces
• Up to 8 IPv4 and 4 IPv6 static routes
• Up to 256 ARP entries Multicast
• IGMPv1/v2/v3 snooping for optimized multicast traffic
• Multicast Listener Discovery (MLD) v1/v2 snooping
• Up to 1000 multicast groups
• IP Multicast VLAN (IPMVLAN) supported Network protocols
•DHCP relay including generic User Datagram Protocol (UDP) relay
• ARP
• Dynamic Host Configuration Protocol (DHCP) relay
• DHCP relay to forward client requests to a DHCP server
• Generic UDP relay per VLAN
• DHCP Option 82: Configurable relay agent information |
| RJ-45 10/100/1000 ports | 8 |
| RJ-45/SFP 10/100/1000 combo ports | 2 |
| Switch width | 21.5 cm (8.50 in) |
| Switch height | 4.4 cm (1.73 in) |
| Switch depth | 29.21 cm (11.5 in) |
