 |
J9775A
Aruba
Within 3-5days in stock/ out of stock Item Backordered
Brand New Sealed
1 Year Warranty
| Quantity: | |
|---|---|
Figure 1 shows the appearance of Aruba J9775A.
Table 1 shows the quick spec.
Product Code | J9775A |
Type | Aruba 2530-48G Switch |
Ports |
|
Throughput | Up to 77.3 Mp/s (64-byte packets) |
Switching capacity | 104 Gb/s |
Dimensions (W x D x H) | 44.3 x 25.4 x 4.45 cm (17.44 x 10.00 x 1.75 in) (1U height) |
Weight | 3.08 kg (6.8 lb) |
Figure 2 shows the front panel of Aruba J9775A.
Note:
① | Power, Fault, and Locator LEDs |
② | Console Port |
③ | LED Mode select button and indicator LEDs |
④ | 48 × RJ-45 autosensing 10/100/1000 ports |
⑤ | 4 × SFP slots |
Figure 3 shows the back panel of Aruba J9775A.
Note:
① | AC Power Connector |
Table 2 shows the comparison.
Product Code | J9775A | ||||
Type | Aruba 2530-8 Switch | Aruba 2530-24G Switch | Aruba 2530-48G Switch | Aruba 2530-24G-PoE+ Switch | Aruba 2530-48G-PoE+ Switch |
PoE power | N/A | N/A | N/A | 195 W | 382 W |
Throughput | up to 4.1 million pps (64-byte packets) | Up to 41.6 million pps (64-byte packets) | Up to 77.3 Mp/s (64-byte packets) | up to 41.6 million pps (64-byte packets) | Up to 77.3 million pps (64-byte packets) |
Switching capacity | 5.6 Gb/s | 56 Gb/s | 104 Gb/s | 56 Gb/s | 104 Gb/s |
J9775A Specifications | |
Type | Aruba 2530-48G Switch |
System specifications | |
Ports |
|
Memory and processor | Processor: ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated. |
Mounting | Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting. |
Management | IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB);IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB. |
Performance (IPv6 Ready Certified) | |
1000 Mb latency | < 2.3 µs (LIFO 64-byte packets) |
100 Mb Latency | < 7.4 µs (LIFO 64-byte packets) |
Throughput | Up to 77.3 Mp/s (64-byte packets) |
Switching capacity | 104 Gb/s |
MAC address table size | 16000 entries |
Physical specifications | |
Dimensions (W x D x H) | 44.3 x 25.4 x 4.45 cm (17.44 x 10.00 x 1.75 in) (1U height) |
Weight | 3.08 kg (6.8 lb) |
Electrical specifications | |
Maximum heat dissipation | 203 BTU/hr (214.17 kJ/hr) |
Voltage | 100 - 127 / 200 - 240 V ac |
Current | 1.2/0.7 A |
Idle power1 | 29.5 W |
Maximum power rating2 | 59.5 W |
Frequency | 50/60 Hz |
NOTE: 1: Idle power is the actual power consumption of the device with no ports connected. 2: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | |
Environmental specifications | |
Operating temperature | 0° to 45°C (32° to 113°F) |
Operating relative humidity | 15% to 95% @ 40°C (104°F), noncondensing |
Non-operating/storage temperature | -40° to 70°C (-40° to 158°F) |
Non-operating/storage relative humidity | 65°C15% to 90% @ 149°F (65°C), noncondensing |
Altitude | Up to 3 km (10,000 ft) |
Acoustic | Power: 31.0 dB, Pressure: 34.5 dB |
Safety agency certifications | |
Safety | UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1 |
NOTE: IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. | |
Figure 1 shows the appearance of Aruba J9775A.
Table 1 shows the quick spec.
Product Code | J9775A |
Type | Aruba 2530-48G Switch |
Ports |
|
Throughput | Up to 77.3 Mp/s (64-byte packets) |
Switching capacity | 104 Gb/s |
Dimensions (W x D x H) | 44.3 x 25.4 x 4.45 cm (17.44 x 10.00 x 1.75 in) (1U height) |
Weight | 3.08 kg (6.8 lb) |
Figure 2 shows the front panel of Aruba J9775A.
Note:
① | Power, Fault, and Locator LEDs |
② | Console Port |
③ | LED Mode select button and indicator LEDs |
④ | 48 × RJ-45 autosensing 10/100/1000 ports |
⑤ | 4 × SFP slots |
Figure 3 shows the back panel of Aruba J9775A.
Note:
① | AC Power Connector |
Table 2 shows the comparison.
Product Code | J9775A | ||||
Type | Aruba 2530-8 Switch | Aruba 2530-24G Switch | Aruba 2530-48G Switch | Aruba 2530-24G-PoE+ Switch | Aruba 2530-48G-PoE+ Switch |
PoE power | N/A | N/A | N/A | 195 W | 382 W |
Throughput | up to 4.1 million pps (64-byte packets) | Up to 41.6 million pps (64-byte packets) | Up to 77.3 Mp/s (64-byte packets) | up to 41.6 million pps (64-byte packets) | Up to 77.3 million pps (64-byte packets) |
Switching capacity | 5.6 Gb/s | 56 Gb/s | 104 Gb/s | 56 Gb/s | 104 Gb/s |
J9775A Specifications | |
Type | Aruba 2530-48G Switch |
System specifications | |
Ports |
|
Memory and processor | Processor: ARM9E @ 800 MHz, 128 MB flash, 256 MB DDR3 DIMM; packet buffer size: 3 MB dynamically allocated. |
Mounting | Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting. |
Management | IMC - Intelligent Management Center; command-line interface; Web browser; configuration menu; out-of-band management (serial RS-232C or Micro USB);IEEE 802.3 Ethernet MIB; Repeater MIB; Ethernet Interface MIB. |
Performance (IPv6 Ready Certified) | |
1000 Mb latency | < 2.3 µs (LIFO 64-byte packets) |
100 Mb Latency | < 7.4 µs (LIFO 64-byte packets) |
Throughput | Up to 77.3 Mp/s (64-byte packets) |
Switching capacity | 104 Gb/s |
MAC address table size | 16000 entries |
Physical specifications | |
Dimensions (W x D x H) | 44.3 x 25.4 x 4.45 cm (17.44 x 10.00 x 1.75 in) (1U height) |
Weight | 3.08 kg (6.8 lb) |
Electrical specifications | |
Maximum heat dissipation | 203 BTU/hr (214.17 kJ/hr) |
Voltage | 100 - 127 / 200 - 240 V ac |
Current | 1.2/0.7 A |
Idle power1 | 29.5 W |
Maximum power rating2 | 59.5 W |
Frequency | 50/60 Hz |
NOTE: 1: Idle power is the actual power consumption of the device with no ports connected. 2: Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. | |
Environmental specifications | |
Operating temperature | 0° to 45°C (32° to 113°F) |
Operating relative humidity | 15% to 95% @ 40°C (104°F), noncondensing |
Non-operating/storage temperature | -40° to 70°C (-40° to 158°F) |
Non-operating/storage relative humidity | 65°C15% to 90% @ 149°F (65°C), noncondensing |
Altitude | Up to 3 km (10,000 ft) |
Acoustic | Power: 31.0 dB, Pressure: 34.5 dB |
Safety agency certifications | |
Safety | UL 60950-1; CAN/CSA 22.2 No. 60950-1; EN 60825; IEC 60950-1; EN 60950-1 |
NOTE: IEEE 802.3az applies to Gigabit models only; IEEE 802.3at and IEEE 802.3af apply to PoE+ models only. When using SFPs with this product, SFPs with revision "B" or later (product number ends with the letter "B" or later, e.g., J4858B, J4859C) are required. | |
