 |
AirCheck G2
NetScout
factory new
1 year
| Quantity: | |
|---|---|
NetScout AirCheck G2 Wireless Network Tester
Overview
The AirCheck™ G2 Wi-Fi Tester’s intuitive user interface provides actionable intelligence, simplifying wireless troubleshooting and validation. AirCheck G2 is the most cost effective hardware-enabled site survey solution, and provides network professionals of any skill level with complete and accurate information to validate Wi-Fi deployments and changes, resolve connectivity and performance problems quickly, speed up closure of trouble tickets, and ensure your Wi-Fi network meets end users’ needs. • AirCheck G2 offers a one-button AutoTest function that quickly provides a pass/fail indication of Wi-Fi network quality and identifies common problems • Faster and easier Wi-Fi site surveys with AirMapper™ Site Survey • Test the most common Wi-Fi standards (including 802.11ax) with a rugged, handheld, purpose-built wireless tester • See all networks and devices in your location immediately upon power up • View test results, including network availability, connectivity, utilization, throughput, security settings, possible rogues, and interferers • Automate reporting and enable collaboration with result upload and management via Link-Live Cloud Servic
Key Features
AutoTest AirCheck G2 performs the following five essential Wi-Fi tests and provides a pass/fail indication of the wireless environment, as well as identifies common problems — for any level of expertise: • 802.11 Utilization – Reports channels in each band (2.4 GHz and 5 GHz) with the highest airtime utilization. • Non-802.11 Utilization – Reports channels with the highest non-802.11 airtime utilization, indicative of interference sources and high noise levels. • Co-Channel Interference - Reports channels with the most APs on the same channel that exceed the minimum signal level threshold. • Adjacent Channel Interference - Reports interference on a channel caused by APs that are operating on other channels that overlap with that channel. • Network Quality – Verifies coverage, interference, security and ability to connect to specified networks, along with the availability of critical network services such as DHCP and connectivity to specified network targets. • Rogue Access Points - Reports APs other than your authorized devices. These devices may be compromising network security
AirMapper™ Site Survey App
With the AirMapper app, AirCheck G2 users can quickly and easily gather location-based Wi-Fi measurements and create visual heat maps of key performance metrics in the Link-Live Cloud Service or AirMagnet Survey PRO. Simple to use, the AirMapper app is ideal for quick site surveys of new deployments, change validation, and performance verification. • Complete faster and easier Wi-Fi site surveys with an entirely mobile platform • Perform enterprise-grade surveys without the need of a dongle or tethered device • Collaborate—easily visualize and share survey data through Link-Live Cloud Service or AirMagnet Survey PRO • Active Survey tests the actual experience that a client device would encounter, including how effective roaming is working in the environmen
Access Point Discovery
Quickly view all the APs present in the environment and see critical parameters for each one, including signal level, signal/noise ratio, security type, and channel. Find common issues, such as incorrect security type, poor signal coverage, or incorrect channel. (Figure 3) Sort or filter by any parameter, then drill into any AP to set its authorization level and see more details, including number of connected clients, supported rates, 802.11n/ac/ax capabilities and more. From the AP details page, drill into a list of connected clients, or the channel on which the AP operates, to verify any channel utilization or co-channel interference problems. From here you can also use a locator tool to find an AP, set Access Control status (ACL), or you can perform a packet capture.
Network Discovery
Quickly view all the networks present in the environment and see critical parameters for each one, including signal level, signal/noise ratio, security type, and number of access points. Find common issues such as mixed security types, poor signal coverage, or lack of secondary AP coverage. Sort or filter by any parameter, then drill into greater detail on any network, including 802.11 types supported, number of connected clients, channels, and more. From the network details page, drill into a list of APs or clients on the network.
Wired Ethernet Tests
The AirCheck G2’s built-in Ethernet test validates that APs have a working back haul connection to the network. • Diagnose and test Power-over-Ethernet (PoE), link to the switch, DHCP, Gateway, and Internet connections. • Get VLAN, switch name, and port information via CDP/LLDP/EDP for your managed switches.
Channel Utilization and Interference
Quickly determine if channels are over-utilized with Wi-Fi traffic and/or with non-Wi-Fi interference and noise. You can also gain visibility on the level of Wi-Fi traffic and interference over the last 60 seconds on a selected channel, as well as, the access points, clients, and interferers using this channel. Drill into details and detect devices that can cause interference, such as, microwave ovens, wireless game controllers, Bluetooth® devices, Zigbee devices, and wireless video camera
Rogue Detection/Location, Client Details
The AirCheck G2 provides client Details conveying essential information about specific devices and their configuration. Track down rogue APs and unauthorized clients by following the real-time signal level meter and graph over time. Audible indication is provided, and the use of a USB headset for private audio is supported. The AirCheck G2 also supports the option of using an external directional antenna to save significant time when locating devices.
NetScout AirCheck G2 Wireless Network Tester
Overview
The AirCheck™ G2 Wi-Fi Tester’s intuitive user interface provides actionable intelligence, simplifying wireless troubleshooting and validation. AirCheck G2 is the most cost effective hardware-enabled site survey solution, and provides network professionals of any skill level with complete and accurate information to validate Wi-Fi deployments and changes, resolve connectivity and performance problems quickly, speed up closure of trouble tickets, and ensure your Wi-Fi network meets end users’ needs. • AirCheck G2 offers a one-button AutoTest function that quickly provides a pass/fail indication of Wi-Fi network quality and identifies common problems • Faster and easier Wi-Fi site surveys with AirMapper™ Site Survey • Test the most common Wi-Fi standards (including 802.11ax) with a rugged, handheld, purpose-built wireless tester • See all networks and devices in your location immediately upon power up • View test results, including network availability, connectivity, utilization, throughput, security settings, possible rogues, and interferers • Automate reporting and enable collaboration with result upload and management via Link-Live Cloud Servic
Key Features
AutoTest AirCheck G2 performs the following five essential Wi-Fi tests and provides a pass/fail indication of the wireless environment, as well as identifies common problems — for any level of expertise: • 802.11 Utilization – Reports channels in each band (2.4 GHz and 5 GHz) with the highest airtime utilization. • Non-802.11 Utilization – Reports channels with the highest non-802.11 airtime utilization, indicative of interference sources and high noise levels. • Co-Channel Interference - Reports channels with the most APs on the same channel that exceed the minimum signal level threshold. • Adjacent Channel Interference - Reports interference on a channel caused by APs that are operating on other channels that overlap with that channel. • Network Quality – Verifies coverage, interference, security and ability to connect to specified networks, along with the availability of critical network services such as DHCP and connectivity to specified network targets. • Rogue Access Points - Reports APs other than your authorized devices. These devices may be compromising network security
AirMapper™ Site Survey App
With the AirMapper app, AirCheck G2 users can quickly and easily gather location-based Wi-Fi measurements and create visual heat maps of key performance metrics in the Link-Live Cloud Service or AirMagnet Survey PRO. Simple to use, the AirMapper app is ideal for quick site surveys of new deployments, change validation, and performance verification. • Complete faster and easier Wi-Fi site surveys with an entirely mobile platform • Perform enterprise-grade surveys without the need of a dongle or tethered device • Collaborate—easily visualize and share survey data through Link-Live Cloud Service or AirMagnet Survey PRO • Active Survey tests the actual experience that a client device would encounter, including how effective roaming is working in the environmen
Access Point Discovery
Quickly view all the APs present in the environment and see critical parameters for each one, including signal level, signal/noise ratio, security type, and channel. Find common issues, such as incorrect security type, poor signal coverage, or incorrect channel. (Figure 3) Sort or filter by any parameter, then drill into any AP to set its authorization level and see more details, including number of connected clients, supported rates, 802.11n/ac/ax capabilities and more. From the AP details page, drill into a list of connected clients, or the channel on which the AP operates, to verify any channel utilization or co-channel interference problems. From here you can also use a locator tool to find an AP, set Access Control status (ACL), or you can perform a packet capture.
Network Discovery
Quickly view all the networks present in the environment and see critical parameters for each one, including signal level, signal/noise ratio, security type, and number of access points. Find common issues such as mixed security types, poor signal coverage, or lack of secondary AP coverage. Sort or filter by any parameter, then drill into greater detail on any network, including 802.11 types supported, number of connected clients, channels, and more. From the network details page, drill into a list of APs or clients on the network.
Wired Ethernet Tests
The AirCheck G2’s built-in Ethernet test validates that APs have a working back haul connection to the network. • Diagnose and test Power-over-Ethernet (PoE), link to the switch, DHCP, Gateway, and Internet connections. • Get VLAN, switch name, and port information via CDP/LLDP/EDP for your managed switches.
Channel Utilization and Interference
Quickly determine if channels are over-utilized with Wi-Fi traffic and/or with non-Wi-Fi interference and noise. You can also gain visibility on the level of Wi-Fi traffic and interference over the last 60 seconds on a selected channel, as well as, the access points, clients, and interferers using this channel. Drill into details and detect devices that can cause interference, such as, microwave ovens, wireless game controllers, Bluetooth® devices, Zigbee devices, and wireless video camera
Rogue Detection/Location, Client Details
The AirCheck G2 provides client Details conveying essential information about specific devices and their configuration. Track down rogue APs and unauthorized clients by following the real-time signal level meter and graph over time. Audible indication is provided, and the use of a USB headset for private audio is supported. The AirCheck G2 also supports the option of using an external directional antenna to save significant time when locating devices.
