 |
T811
Ruckus
Original New
1 year
| Quantity: | |
|---|---|
Ruckus' BeamFlex+ adaptive antennas allow the T811-CM Series AP to dynamically choose among a host of antenna patterns (over 4,000 possible combinations) in real-time to establish the best possible connection with every device. This leads to:
Better Wi-Fi coverage
Reduced RF interference
Traditional omni-directional antennas, found in generic access points, oversaturate the environment by needlessly radiating RF signals in all directions. In contrast, the Ruckus BeamFlex+ adaptive antenna directs the radio signals per-device on a packet by-packet basis to optimize Wi-Fi coverage and capacity in real-time to support high device density environments. BeamFlex+ operates without the need for device feedback and hence can benefit even devices using legacy standards.
| Antenna Gain | 3 dBi for both 2.4 GHz and 5 GHz |
| Antenna Patterns, per band | 4000+ |
| BeamFlex | Yes |
| ChannelFly | Yes |
| Concurrent Users | 512 |
| Controller Support | SmartZone |
| Ethernet Ports | 1 x 1GbE |
| Fiber Interface | Yes |
| IoT Ready | Yes |
| Other Interfaces | DOCSIS |
| PD-MRC | Yes |
| PHY Rate at 2.4 GHz, maximum | 600 Mb/s |
| PHY Rate at 5 GHz, maximum | 1733 Mb/s |
| Radio Chains:Streams | 4x4:4 |
| Rx Sensitivity at 2.4 GHz | -98 dBm |
| Rx Sensitivity at 5 GHz | -97 dBm |
| SmartMesh | Yes |
| USB | USB 2.0 |
| Wi-Fi Interface Standard | IEEE 802.11a/b/g/n/ac Wave 2 |
| Wi-Fi Interface Standard at 2.4 GHz | 802.11n |
| Wi-Fi Interface Standard at 5 GHz | 802.11ac |
| Wi-Fi Standards |
|
| Supported Rates |
|
| Supported Channels |
|
| MIMO |
|
| Spatial Streams |
|
| Radio Chains and Streams |
|
| Channelization |
|
| Security |
|
| Other Wi-Fi Features |
|
| Controller Platform Support |
|
| Mesh |
|
| IP |
|
| VLAN |
|
| 802.1x |
|
| Tunnel |
|
| Policy Management Tools |
|
| IoT Capable |
|
| Physical Size |
|
| Weight |
|
| Ingress Protection |
|
| Mounting |
|
| Operating Temperature |
|
| Operating Humidity |
|
Ruckus' BeamFlex+ adaptive antennas allow the T811-CM Series AP to dynamically choose among a host of antenna patterns (over 4,000 possible combinations) in real-time to establish the best possible connection with every device. This leads to:
Better Wi-Fi coverage
Reduced RF interference
Traditional omni-directional antennas, found in generic access points, oversaturate the environment by needlessly radiating RF signals in all directions. In contrast, the Ruckus BeamFlex+ adaptive antenna directs the radio signals per-device on a packet by-packet basis to optimize Wi-Fi coverage and capacity in real-time to support high device density environments. BeamFlex+ operates without the need for device feedback and hence can benefit even devices using legacy standards.
| Antenna Gain | 3 dBi for both 2.4 GHz and 5 GHz |
| Antenna Patterns, per band | 4000+ |
| BeamFlex | Yes |
| ChannelFly | Yes |
| Concurrent Users | 512 |
| Controller Support | SmartZone |
| Ethernet Ports | 1 x 1GbE |
| Fiber Interface | Yes |
| IoT Ready | Yes |
| Other Interfaces | DOCSIS |
| PD-MRC | Yes |
| PHY Rate at 2.4 GHz, maximum | 600 Mb/s |
| PHY Rate at 5 GHz, maximum | 1733 Mb/s |
| Radio Chains:Streams | 4x4:4 |
| Rx Sensitivity at 2.4 GHz | -98 dBm |
| Rx Sensitivity at 5 GHz | -97 dBm |
| SmartMesh | Yes |
| USB | USB 2.0 |
| Wi-Fi Interface Standard | IEEE 802.11a/b/g/n/ac Wave 2 |
| Wi-Fi Interface Standard at 2.4 GHz | 802.11n |
| Wi-Fi Interface Standard at 5 GHz | 802.11ac |
| Wi-Fi Standards |
|
| Supported Rates |
|
| Supported Channels |
|
| MIMO |
|
| Spatial Streams |
|
| Radio Chains and Streams |
|
| Channelization |
|
| Security |
|
| Other Wi-Fi Features |
|
| Controller Platform Support |
|
| Mesh |
|
| IP |
|
| VLAN |
|
| 802.1x |
|
| Tunnel |
|
| Policy Management Tools |
|
| IoT Capable |
|
| Physical Size |
|
| Weight |
|
| Ingress Protection |
|
| Mounting |
|
| Operating Temperature |
|
| Operating Humidity |
|
