 |
R670
Ruckus
New
1 Year
| Quantity: | |
|---|---|
High-Performance Wi-Fi 7 2x2:2 Access Point with 9.3 Gbps max rate and Embedded IoT
The R670 expands the reach of Wi-Fi 7 and addresses the needs of every day deployments, in guest rooms, classrooms, hotel rooms and lobby. It supports data intensive streaming like 4K/8K video transmissions, while latency voice and data with stringent quality-of-service requirements.
The RUCKUS R670 is a high-performance Wi-Fi 7, tri-band concurrent indoor AP that delivers 6 spatial streams (2x2:2 in 2.4GHz, 5GHz and 6GHz or 2x2:2 in 2.4GHz and 4x4:4 in 5GHz in dual band mode) It delivers industry-leading performance environments with a combined data rate of 9.34 Gbps.
Furthermore, a 5 Gbps Ethernet port eliminates wired backhaul for full use of available Wi-Fi capacity. Wireless requirements within enterprises are expanding beyond Wi-Fi. The R670 has one built-in IoT radio offering onboard BLE or Zigbee The R670 is a converged access point that allows customers to seamlessly integrate any new wireless technologies with the USB port.
Access Point BeamFlex Antenna Pattern
RUCKUS’ BeamFlex+ adaptive antennas allow the R670 AP to dynamically choose among a host of antenna patterns (over 4,000 possible combinations) in real-time to establish the best possible connection with every device. This leads to: • Better Wi-Fi coverage • Reduced RF interference Traditional omni-directional antennas, found in generic access points, oversaturate the environment by needlessly radiating RF signals in all directions. In contrast, the RUCKUS BeamFlex+ adaptive antenna directs the radio signals per-device on a packet by-packet basis to optimize Wi-Fi coverage and capacity in real-time to support high device density environments. BeamFlex+ operates without the need for device feedback and hence can benefit even devices using legacy standards.
Compare to Similar Items
| Part Number | RUCKUS R670 Indoor Access Point | RUCKUS T670 Outdoor Access Point | RUCKUS R650 Indoor Access Point |
| Category | Wireless Access Points | Wireless Access Points | Wireless Access Points |
| Description | High-Performance Wi-Fi 7 2x2:2 Indoor Access Point with 9.3 Gbps max rate and Embedded IoT | High-Performance Wi-Fi 7 2x2:2 Outdoor Access Point with 9.3 Gbps max rate | High Performance Wi-Fi 6 4x4:4 Indoor Access Point with 3 Gbps max rate and Embedded IoT |
| Product Type | Indoor access point | Outdoor access point | Indoor access point |
| Antenna Gain | Up to 4 dBi | Up to 3 dBi | Up to 4 dBi |
| Concurrent Users | 768 | 768 | 512 |
| Ethernet Ports | 1 x 1 / 2.5 / 5 GbE | 1 x 1 GbE | 1 x 1 / 2.5 / 5 GbE | 1 x 1 GbE | 1 x 1 GbE | 1 x 2.5 GigE |
| Number of Radios | Tri-Radio | Tri-Radio | none |
| USB | 2.0 | 2.0 | none |
High-Performance Wi-Fi 7 2x2:2 Access Point with 9.3 Gbps max rate and Embedded IoT
The R670 expands the reach of Wi-Fi 7 and addresses the needs of every day deployments, in guest rooms, classrooms, hotel rooms and lobby. It supports data intensive streaming like 4K/8K video transmissions, while latency voice and data with stringent quality-of-service requirements.
The RUCKUS R670 is a high-performance Wi-Fi 7, tri-band concurrent indoor AP that delivers 6 spatial streams (2x2:2 in 2.4GHz, 5GHz and 6GHz or 2x2:2 in 2.4GHz and 4x4:4 in 5GHz in dual band mode) It delivers industry-leading performance environments with a combined data rate of 9.34 Gbps.
Furthermore, a 5 Gbps Ethernet port eliminates wired backhaul for full use of available Wi-Fi capacity. Wireless requirements within enterprises are expanding beyond Wi-Fi. The R670 has one built-in IoT radio offering onboard BLE or Zigbee The R670 is a converged access point that allows customers to seamlessly integrate any new wireless technologies with the USB port.
Access Point BeamFlex Antenna Pattern
RUCKUS’ BeamFlex+ adaptive antennas allow the R670 AP to dynamically choose among a host of antenna patterns (over 4,000 possible combinations) in real-time to establish the best possible connection with every device. This leads to: • Better Wi-Fi coverage • Reduced RF interference Traditional omni-directional antennas, found in generic access points, oversaturate the environment by needlessly radiating RF signals in all directions. In contrast, the RUCKUS BeamFlex+ adaptive antenna directs the radio signals per-device on a packet by-packet basis to optimize Wi-Fi coverage and capacity in real-time to support high device density environments. BeamFlex+ operates without the need for device feedback and hence can benefit even devices using legacy standards.
Compare to Similar Items
| Part Number | RUCKUS R670 Indoor Access Point | RUCKUS T670 Outdoor Access Point | RUCKUS R650 Indoor Access Point |
| Category | Wireless Access Points | Wireless Access Points | Wireless Access Points |
| Description | High-Performance Wi-Fi 7 2x2:2 Indoor Access Point with 9.3 Gbps max rate and Embedded IoT | High-Performance Wi-Fi 7 2x2:2 Outdoor Access Point with 9.3 Gbps max rate | High Performance Wi-Fi 6 4x4:4 Indoor Access Point with 3 Gbps max rate and Embedded IoT |
| Product Type | Indoor access point | Outdoor access point | Indoor access point |
| Antenna Gain | Up to 4 dBi | Up to 3 dBi | Up to 4 dBi |
| Concurrent Users | 768 | 768 | 512 |
| Ethernet Ports | 1 x 1 / 2.5 / 5 GbE | 1 x 1 GbE | 1 x 1 / 2.5 / 5 GbE | 1 x 1 GbE | 1 x 1 GbE | 1 x 2.5 GigE |
| Number of Radios | Tri-Radio | Tri-Radio | none |
| USB | 2.0 | 2.0 | none |
